-
-
·
SDX® Accessories
Cone Faced Body These are designed to prevent build up on the front face of the nozzle body. Available in other angles and materials upon request. Check Valves There are several versions of non drip check valves available for the SDX® V range of nozzles, please contact the factory for further information. Butt Weld Adaptor…
-
·
Mini SDX®
The unique swirl chamber is the hear of Delavan’s Mini SDX® nozzle design. The single inlet spiral configuration produces a natural, free vortex pattern. Friction is minimized, permitting 10-20% lower operating pressure than conventional slotted distributor nozzles. This lengthens both pump and nozzle life. Construction and Materials Max. Design Pressure: 350 Bar.G.Max. Design Temperature: 150°.
-
·
Compact SDX®
The Compact SDX® is a new and improved nozzle, featuring easy to assemble, longer lasting parts. It mimics the Mini SDX® in size but has a higher flow range with more spray angles. Construction and Materials Max. Design Pressure: 345 Bar.G.Max. Design Temperature: Determined by O-Ring material.
-
·
SDX® V
The SDX® V features an 8 part construction and is the world’s most user friendly spray drying nozzle,requiring only hand tight engagement of the nozzle body into the adaptor throughout the pressure range. The SDX® V also features an improved wear life / performance and effortless maintenance for the lowest cost of ownership. Features and…
-
·
SDX®
The SDX® is a classic eight part construction nozzle made from stainless steel and would typically be used for high pressure and high temperature applications. Construction and Materials Max. Design Pressure: 500 Bar.G.Max. Design Temperature: 540° (Metal Seals), 150° (Other Seals).
-
·
Type W “All Purpose”
Type W nozzles produce a spray which is neither truly hollow nor solid. Adhering to the appliance manufacturer’s specifications, these nozzles may be used in place of either solid or hollow cone nozzles between .40 GPH and 8.00 GPH, regardless of the burner’s air pattern. The lower flow rates tend to be hollower. Higher flow…
-
·
Type B
DEL-O-FLO™ NOZZLE OFFERS AN ALTERNATIVE Historically, extra filtration has been the only remedy available for low gallonage Applications. The Del-O-Flo™ nozzle reduces plugging with patented technology that forces particulates and other contaminants through and out the nozzle. “The Del-O-Flo™ contains an extra-fine filter that stops larger particles that cause the problems in low flow situations,”…
-
·
Type A
DEL-O-FLO™ NOZZLE OFFERS AN ALTERNATIVE Historically, extra filtration has been the only remedy available for low gallonage Applications. The Del-O-Flo™ nozzle reduces plugging with patented technology that forces particulates and other contaminants through and out the nozzle. “The Del-O-Flo™ contains an extra-fine filter that stops larger particles that cause the problems in low flow situations,”…
-
·
SNA
The Siphon Type SNA™ Air Atomising Nozzles are primarily used for extremely fine spray particle sizes at low air pressure. This type of nozzle produces a solid cone spray pattern with extremely fine particle size at low air pressures and low CFM. The nozzle will flow in either a horizontal or vertical position
